Using ATMEGA16 microcontroller this blogs describes programs of led , lcd , ADC ( analog to digital converter ), timer , spi communication , uart , docklite , proteus , cvavr ,avrstudio, projects
Subscribe to:
Posts (Atom)
Popular Posts
-
DOWNLOAD DATA SHEET CLICK HERE • MOSI (Master Out Slave In) • MISO (Master In Slave Out) • SCK (Serial Clock) • RESET • GND...
-
All the configurations in microcontroller is set through 8 bit (1 byte) locations in RAM (RAM is a bank of memory bytes) of the microcontrol...
-
AVR(ADVANCE VIRTUAL RISC) is a modified HARWARD architecture 8 bit RISC single chip microcontroller which was developed by atmel in 1996. A...
-
Architecture Broad classification Embedded(self contained) 8 bit microcontroller 16 to 32 microcontroller Digital signal proce...
-
Lets start with basic, ie .digital system. in electronics as you already know only 2 states are used - LOGIC HIGH and LOGIC LOW, represented...
-
Programmer basically consists of two parts: • Software (to open .hex file on your computer) • Hardware (to connect microcontroller) Ha...
-
adding microcontroller adding lcd to add switch, search for "button" sett...
-
DOWNLOAD CVAVR HERE if you want to interface lcd also: setting up adc : click h...
-
Lcd a 16 pin lcd have following pin connection Printing Functions Now once the connections have been made, we are ready ...
-
Timer is an 8 bit register that keeps on increasing its value, so one of the basic conditions is the situation when timer register O...
No comments:
Post a Comment